Recording from the radio
1 Tune in to the desired station. (See page 19.)
2 Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be performed.
3 Press the REC PAUSE (
) button.
Recording will be paused.
4 Press the 
/ 
(TAPE 2 
) button to start recording.
To interrupt recording:
Press the REC PAUSE (
) button.
To resume recording, press the 
/ 
(TAPE 2 
) button.
To stop recording:
Press the 
(TAPE 
) button.
Note:
If you hear a whistling noise whilst recording an AM station, move the AM loop aerial.
Erase-prevention tab of cassette tapes:
When recording on a cassette tape, make |
| Side A |
|
| |
sure that the |
|
|
moved. Cassettes have removable tabs that |
|
|
prevent accidental recording or erasing. | Tab for side B | Tab for side A |
To protect the recorded sound, remove the tab after recording. Cover the tab hole with adhe- sive tape to record on the tape without the tab.
Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
1 Press the
2 Load a prerecorded cassette into the
TAPE 1 cassette compartment. Insert a blank tape into the TAPE 2 cassette compartment.
It is recommended that the recording tape is the same length as the master tape.
3 Press the TAPE (1 
2) button until "TAPE 1" appears on the display.
4 Press the REC PAUSE (
) button.
Recording will be paused.
5 Press the 
/ 
(TAPE 2 
) button to start dubbing.
To stop dubbing:
Press the 
(TAPE 
) button.
TAPE 1 and TAPE 2 will simultaneously stop.
Erasing recorded tapes
1Load the tape to be erased into the TAPE 2 cassette compartment with the side to be erased facing toward you.
2Press the TAPE (1 
2) button until "TAPE 2" appears on the display.
3Press the REC PAUSE (
) button.
4Press the 
/ 
(TAPE 2 
) button to start erasing.
Note:
Make sure that the TAPE 1 is not in use.
Tape Recording - Recording to a cassette tape -
Tuning (See page 19.)
23
02/1/8