Weslo WLTL62790 user manual Problem The walking belt slows when walked on, 2ÓÐ3Ó

Page 20

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length.

b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 2 to 3 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, in- sert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

2ÓÐ3Ó

 

 

Rear Roller Adjustment Bolts

c. If the walking belt still slows, please call our Customer Service Department, toll-free.

PROBLEM: The walking belt is off-center

SOLUTION: a. If the walking belt has shifted to the left, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjustment bolt clockwise, and the right bolt counterclockwise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the tread- mill for a few minutes. Repeat until the walking belt is centered.

b. If the walking belt has shifted to the right, first re- move the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjust- ment bolt counterclockwise, and the right bolt clockwise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered.

PROBLEM: The walking belt slips when walked on

SOLUTION: a. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts clockwise, 1/4 of a turn. When the walking belt is cor- rectly tightened, you should be able to lift each side of the walking belt 2 to 3 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

a

b

a

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Customer HOT Line QUESTIONS?Model No. WLTL62790 Serial No Table of Contents Important Precautions Page Ground Before YOU Begin Left Side Right SideAssembly Your own phillips screwdriverPage HOW to Plug in the Power Cord Performant Lubetm Walking BeltConsole Diagram Features of the Console STEP-BY-STEP Console OperationHOW to Change the Incline of the Treadmill CALS/FAT CalsAntenna Connections Diagram of the Television Features of the TelevisionTelevision Operation Catv Cable Connection Basic TV OperationAutomatic Memory Tuning Channel ProgrammingMemorizing Channels Erasing ChannelsCatv Channel Reference Table Manually Searching for and Storing ChannelsCable TV Catv Operation Picture Level Adjustments Using the Recording TimerSetting the Clock Setting the On TimerSetting the Channel to be Recorded Using the Menu FunctionHOW to Connect a VCR Setting the Off TimerHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USETROUBLE-SHOOTING Problem The power turns off during useTop ViewProblem The walking belt slows when walked on 2ÓÐ3ÓProblem TV reception is poor Workout Guidelines Conditioning GuidelinesExercise Intensity Part LISTÑModel No. WLTL62790 Key Qty DescriptionExploded DRAWINGÑModel No. WLTL62790 106 112 105 104 111 100 110 102 107 116 101 108 103 117 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty
Top Page Image Contents