7.Attach the Latch Housing (48) to the Left Upright (53) with two M4.2 x 18mm Screws (58); start both Screws, and then tighten both of them.
8.Attach the Left Upper Body Arm (105) to the Left Upright (53) with two 1/4" x 3 1/2" Screws (103), two 1/4" Flat Washers (101), and two M10 Star Washers (9). Make sure that the Left Upper
Body Arm is on the side of the console assem- bly shown.
Attach the Right Upper Body Arm (not shown) in the same way.
7 |
|
| 53 |
48 |
|
58 |
|
8 |
|
Console |
|
Assembly |
|
53 | 105 |
| |
101 |
|
103 | 9 |
|
9.Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys in a secure place. One of the hex keys is used to adjust the walking belt (see page 19). To protect the floor or carpet, place a mat under the treadmill.
10