Weslo WLTL29712.0 user manual Information Mode, HOW to Change the Incline of the Treadmill

Page 14

THE INFORMATION MODE

The console features an information mode that allows you to turn on and turn off the demo mode and to select miles or kilometers as the unit of measurement. The information mode also keeps track of treadmill usage information.

To select the information mode, hold down the Stop button, insert the key into the console, and then release the Stop button. When the information mode is selected, the following information will appear in the display:

The console features a dis-

play demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned

on, the console will function

normally when you plug in the power cord, press the power switch into the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the buttons will not function. If the demo mode is turned on, a "d" will appear in the left display while the information mode is selected. To turn on or turn off the demo mode, press the speed decrease button.

The left display will also show an "E" for English miles or an "M" for metric kilometers. To change the unit of measurement, press the speed increase button.

The right display will show the total number of hours that the treadmill has been operated and the total num- ber of miles or kilometers that the walking belt has moved, for a few seconds each.

To exit the information mode, remove the key from the console.

HOW TO CHANGE THE INCLINE OF THE TREADMILL

To vary the intensity of your exercise, you can change the incline of the treadmill. There are two incline levels.

Before changing the incline, remove the key and unplug the power cord. Next, fold the treadmill to the storage position (see page 15).

To change the incline, rotate both incline feet to the desired position. CAUTION: Before using the tread- mill, make sure that both incline feet are in the same position and are held firmly in place.

After you have adjusted the incline feet, lower the treadmill (see page 15).

Incline

Feet

14

Image 14
Contents Call TOLL-FREE QUESTIONS?Model No. WLTL29712.0 Serial No Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Page Before YOU Begin Nose pliers AssemblyMake sure that the power cord is unplugged Start all four Screws, and then tighten ThemScrews, and then tighten them Page Use a Surge Suppressor Operation and AdjustmentHOW to Connect the Power Cord Console Diagram Features of the ConsoleSelect the manual mode HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key into the consoleMeasure your heart rate if desired Follow your progress with the displaysLeft display-As HOW to USE a Preset Workout Select a preset workoutInformation Mode HOW to Change the Incline of the TreadmillHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Lower the Treadmill for USETroubleshooting Symptom The power turns off during useSymptom The walking belt slows when walked on Repeat until the walking belt is centered Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart List Key No. Qty DescriptionDrawing a Exploded Drawing B Exploded Drawing C Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty