4.Attach the console assembly to the Upright (73) and the Handrails (69) with six M4.2 x 19mm Screws (3). Be careful not to pinch the wires.
5.Attach the Latch Housing (72) to the left Upright (73) with two #10 x 1" Tek Screws (83); start both Screws, and then tighten them.
4 | Console Assembly |
|
|
|
|
| |
| 73 | 3 |
|
69 | 3 | 69 | |
3 |
|
|
|
5 |
|
|
|
73
72
83 
6.Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys in a secure place. One of the hex keys is used to adjust the walking belt (see pages 17 and 18). To protect the floor or carpet, place a mat under the treadmill.
8