Weslo WLTL29508.0 user manual HOW to Change the Incline of the Treadmill

Page 16

HOW TO CHANGE THE INCLINE OF THE TREADMILL

To vary the intensity of your exercise, you can change the incline of the treadmill. There are three incline lev- els. Before changing the incline, remove the key and unplug the power cord. Next, fold the treadmill to the storage position (see page 17).

To change the incline, first remove the incline pin from one of the incline legs. Adjust the incline leg to the de- sired position, and then fully reinsert the incline pin.

Adjust the other incline leg in the same way. CAUTION:

Before using the treadmill, make sure that both in- cline legs are at the same height and that both in- cline pins are fully inserted into the incline legs.

After you have adjusted the incline legs, lower the treadmill (see page 18).

Incline	Incline	Incline
Pin	Incline	Pin
	Legs

16

Image 16

Contents QUESTIONS? Model No. WLTL29508.0 Serial NoMon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT On the WEBTable of Contents Important Precautions Treadmill, and before performing the main Before YOU Begin For your benefit, read this manual carefully beforeAssembly See the inset drawing. Locate the wire tie Hold the Left Upright 53 so that the two indiCated small holes are on top. Attach the Left Bolts 2. Do not tighten the Bolts yetPage Connector If the Connectors are not CON Make sure that no wires are pinched. StartFully tighten the Bolts yet Steps 10 and 11. Firmly tighten all six M8 15mm BoltsScrews before tightening either of them HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to Turn on the Power HOW to USE the Manual Mode Insert the key into the consoleStart the walking belt Follow your progress with the track and the dis- playsHOW to USE a Speed Program Measure your heart rate if desiredHOW to Change the Incline of the Treadmill HOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingCompatible with GFCI-equipped outlets Problem The walking belt slows when walked on Walking belt. If the walking belt has shifted toExercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches R1108A DescriptionExploded Drawing A-Model No. WLTL29508.0 R1108A Exploded Drawing B-Model No. WLTL29508.0 R1108A Exploded Drawing C-Model No. WLTL29508.0 R1108A Exploded Drawing D-Model No. WLTL29508.0 R1108A Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT