Weslo WLTL29508.0 user manual Treadmill, and before performing the main

Page 4

21. Do not attempt to raise, lower, or move the	25. Never drop or insert any object into any
treadmill until it is properly assembled. (See	opening on the treadmill.
ASSEMBLY on page 6 and HOW TO FOLD	26. DANGER: Always unplug the power
AND MOVE THE TREADMILL on page 17.)	26. DANGER: Always unplug the power
You must be able to safely lift 45 lbs. (20 kg)	cord immediately after use, before cleaning
to raise, lower, or move the treadmill.	the treadmill, and before performing the main-
22. When folding or moving the treadmill, make	tenance and adjustment procedures de-
22. When folding or moving the treadmill, make	scribed in this manual. Never remove the
sure that the storage latch is holding the	motor hood unless instructed to do so by an
frame securely in the storage position.	authorized service representative. Servicing
23. Do not change the incline of the treadmill by	other than the procedures in this manual
23. Do not change the incline of the treadmill by	should be performed by an authorized service
placing objects under the treadmill.	representative only.
24. Inspect and properly tighten all parts of the	27. This treadmill is intended for in-home use
treadmill regularly.	only. Do not use this treadmill in any commer-
	cial, rental, or institutional setting.

SAVE THESE INSTRUCTIONS

4

Image 4

Contents QUESTIONS? Model No. WLTL29508.0 Serial NoMon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT On the WEBTable of Contents Important Precautions Treadmill, and before performing the main Before YOU Begin For your benefit, read this manual carefully beforeAssembly See the inset drawing. Locate the wire tie Hold the Left Upright 53 so that the two indiCated small holes are on top. Attach the Left Bolts 2. Do not tighten the Bolts yetPage Connector If the Connectors are not CON Make sure that no wires are pinched. StartFully tighten the Bolts yet Steps 10 and 11. Firmly tighten all six M8 15mm BoltsScrews before tightening either of them HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to Turn on the Power HOW to USE the Manual Mode Insert the key into the consoleStart the walking belt Follow your progress with the track and the dis- playsHOW to USE a Speed Program Measure your heart rate if desiredHOW to Change the Incline of the Treadmill HOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingCompatible with GFCI-equipped outlets Problem The walking belt slows when walked on Walking belt. If the walking belt has shifted toExercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches R1108A DescriptionExploded Drawing A-Model No. WLTL29508.0 R1108A Exploded Drawing B-Model No. WLTL29508.0 R1108A Exploded Drawing C-Model No. WLTL29508.0 R1108A Exploded Drawing D-Model No. WLTL29508.0 R1108A Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT