11.With the help of a second person, carefully lower the Uprights (not shown) to the floor.
Attach the ground wire on the Wire Harness (39) to the indicated hole in the Base (52) with an M4 x 10mm Ground Screw (84).
12.See the lower drawing. Position the Uprights (53, 54) so that the Frame (51) is centered be- tween them.
Firmly tighten the two M10 x 60mm Patch Bolts
(1) and the four M10 x 75mm Bolts (2). Be care- ful not to overtighten the M10 x 60mm Patch Bolts. Raise the Uprights (53, 54).
11
52 
Hole
Ground Wire
84
| 39 |
|
12 | 53, 54 | 1 |
|
| 2 |
| Top View |
|
54 | 51 | 53 |
12