Weslo WLTL37308.0 user manual Make sure that the power cord is unplugged

Page 7

1.Make sure that the power cord is unplugged.

Position the Base (52) and the Base Extensions (45) upside-down as shown.

Attach six Base Feet (63) to the Base (52) and the Base Extensions (45) with six M4.2 x 25.4mm Tek Screws (26).

2.Have a second person hold the Base (52) in the position shown.

Identify the Left Upright (53) (the Right Upright [54] has a square hole near the lower end).

Hold the Left Upright (53) so the two round holes are on top as shown. Attach the Left Upright to the Base (52) with two M10 x 75mm Bolts (2) and two M10 Star Washers (9). Do not fully tighten the Bolts yet.

Attach the Right Upright (54) to the Base (52) in the same way.

1

 

 

52

 

26

 

 

26

 

 

 

 

 

 

 

63

26

 

63

 

45

 

 

26

 

 

45

26

63

 

 

63

 

63

 

26

 

63

 

 

 

 

 

 

 

2

 

 

 

 

Round Holes

 

Round Holes

 

54

 

Square

2

 

53

Hole

52

9

9

2

 

 

 

 

7

Image 7
Contents On the WEB QUESTIONS?Model No. WLTL37308.0 Serial No Mon.-Fri a.m.-6 p.m. MST Sat a.m.-4 p.m. MSTTable of Contents Important Precautions Page For your benefit, read this manual carefully before Before YOU BeginAssembly Make sure that the power cord is unplugged Bolt Head Wire Tie See the inset drawing in . Identify See the left inset drawing. Identify the twoOuter side of the Frame Spacer facing Right Upright Star Washer 9 do not fully tighten the Patch Bolt yetConsole Tie Wire Bracket Large Hole 105 Console Wire Then, firmly tighten all six Bolts Top View Same way. Be careful not to pinch Wires in the Right Upright not shownHOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console Console DiagramStart the walking belt HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key into the consoleProximately Contacts Seconds- avoid moving Measure your heart rate if desiredTurn on the fan if desired HOW to USE a Preset Workout HOW to USE the Crosswalk Arms Information ModeHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingCompatible with GFCI-equipped outlets Walking belt. If the walking belt has shifted to Problem The walking belt slows when walked onProblem The crosswalk arms squeak during use Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. WLTL37308.0Qty Exploded Drawing A-Model No. WLTL37308.0 R0808B Exploded Drawing B-Model No. WLTL37308.0 R0808B Exploded Drawing C-Model No. WLTL37308.0 R0808B Exploded Drawing D-Model No. WLTL37308.0 R0808B Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT