Weslo WATL27205.1 user manual

Page 7

3.Hold an Upright Spacer (59) against one side of the Frame (96) as shown. Insert a 4” Frame Bolt (54) into the indicated hole in the Upright Spacer and the Frame. Next, tighten a 3/4” Tek Screw (9) into the Upright Spacer and the Frame. Then, remove the 4” Frame Bolt. Repeat this procedure on the other side of the Frame.

Have a second person lift the front end of the Frame

(96). Insert a 4” Frame Bolt (54) with a 3/8” Washer (12) and a 3/8” Star Washer (55) into the Right Upright (104) and the right Upright Spacer (59), and tighten the Frame Bolt into the Frame. Do not overtighten the Frame Bolt. Repeat this procedure on the left side of the Frame.

4.Attach the Latch Housing (46) to the Left Upright (47) with two 3/4” Screws (38). Make sure that the large hole in the Latch Housing is on the side shown.

5.Identify the Right Handrail (40), which has a pulse bar bracket on its left side. Feed the Wire Harness (65) up into the large bracket on the Right Handrail and out of the large hole in the left side. (Note: It may be helpful to use needlenose pliers to pull the Wire Harness out of the hole.) Remove any nylon ties from the large bracket.

Insert the large bracket on the Right Handrail (40) into the upper end of the Right Upright (104). Attach the Right Handrail with two 1” Bolts (43), two 1/4” Washers (44), two 1/4” Star Washers (45), a 4” Handrail Bolt (78), and a 5/16” Washer (106) as shown. Do not tighten the Bolts yet.

See drawing 5a. Insert the included nylon tie through the indicated hole in the Right Handrail (40). See drawing 5b. Look into the Right Handrail and make sure that the Wire Harness (65) is secured to the side shown. Then, tighten the nylon tie and cut the excess off the end.

Attach the Left Handrail (not shown) in the same way. Note: You may need to tip the Left Handrail to one side as you insert the bracket. There is not a wire harness in the left Upright (not shown).

3

104

 

 

 

 

55

12

 

9

54

 

59

 

 

 

96

 

 

Hole

 

4

 

 

 

47

 

46

 

 

 

 

 

 

Large Hole

 

38

 

 

 

 

5

 

 

 

Large

 

 

65

 

 

 

 

 

 

Hole

 

 

 

 

 

 

40

 

Pulse Bar Bracket

 

 

 

Large Bracket

 

 

43

 

 

 

44

 

 

 

 

 

 

 

 

 

 

45

 

 

 

 

 

104

 

43

44

45

 

78

 

 

 

 

 

106

5a

Tie

 

 

5b

Tie

 

 

 

 

40

 

40

 

 

 

 

 

 

 

 

 

65

7

Image 7
Contents Model No. WATL27205.1 Serial No QUESTIONS?Customer HOT Line Table of Contents Operation and Adjustment Important PrecautionsPage Right Side Before YOU BeginBack Wheels 63 are in the indicated position AssemblyRight Upright is oriented so the pivot hole is Page Tighten the Pulse Bar Screws Top View BoltsHOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console HOW to USE the Manual Mode HOW to Turn on the PowerMeasure your heart rate if desired Whenkey. you are finished exercising, remove HOW to USE a Preset ProgramSelect one of the eight preset programs Listen to your favorite FM radio station if DesiredListen to the radio if desired HOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Move the TreadmillProblem The power turns off during use TroubleshootingProblem The walking belt slows when walked on Exercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesPart Identification Chart Key Qty Description R1105AExploded DRAWING-Model No. WATL27205.1 Shanghai Newlife Fitness Equipment, Inc HOW to Order Replacement PartsLimited Warranty Tel