Weslo WATL27105.1 user manual Operation and Adjustment, PRE-LUBRICATED Walking Belt

Page 10

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deteri- orate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

This product must be earthed. If it should malfunction or break

down, earthing provides a path of least resistance for electric cur- 1 rent to reduce the risk of electric shock. This product is equipped

with a power cord having an equipment-earthing conductor and an earthing plug. Important: If the power cord is damaged, it must be replaced with a manufacturer-recommended power cord.

See drawing 1. Plug the indicated end of the power cord into the socket on the treadmill.

See drawing 2. Plug the power cord into an appropriate outlet that is

 

 

 

2

properly installed and earthed in accordance with all local codes and

 

 

 

ordinances. Important: The treadmill is not compatible with

 

 

GFCI-equipped outlets.

 

 

 

 

 

Socket on Treadmill

Power

Cord

Outlet

DANGER: Improper connection of the equipment-earthing conductor can result in an increased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly earthed. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

10

Image 10
Contents Model No. WATL27105.1 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Page Right Side Before YOU BeginFront BackAssembly Page Crossbar Screws yet Screws and then tighten them Top ViewHOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the Console HOW to Turn on the PowerInsert the key into the console Select the manual modeAccess the information mode if desired Press the Start button or the Speed increaseWhenkey. you are finished exercising, remove HOW to USE a Speed ProgramMeasure your heart rate, if desired Insert the key fully into the consoleHOW to Change the Incline of the Treadmill When the program ends, remove the key from ConsoleMeasure your heart rate if desired HOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencyPart Identification Chart Part LIST-Model No. WATL27105.1 Qty DescriptionNo. WATL27105.1 Limited Warranty HOW to Order Replacement PartsShanghai Newlife Fitness Equipment, Inc