Weslo WLTL01806.0 user manual HOW to Fold the Treadmill for Storage, HOW to Move the Treadmill

Page 9

3.Turn off the console.

To turn off the console, simple wait for a few min- utes. If the walking belt is not moved and the con- sole button is not pressed for a few minutes, the console will turn off automatically.

HOW TO FOLD THE TREADMILL FOR STORAGE

When the treadmill is not in use, it can be folded to the compact storage position. CAUTION: You must be able to safely lift 25 pounds (11 kg) to raise, lower, or move the treadmill.

1.See drawing 1a below. Remove the frame pin. See drawing 1b. Hold the treadmill frame with both hands. CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the frame, make sure to lift with your legs rather than your back. Raise the frame to the vertical position.

1a

 

1b

 

Frame Pin

Frame

 

 

2. Using your right

2

 

hand, pull the

 

 

 

latch knob to the

 

 

right and hold it.

 

Hole

Raise the frame

 

 

 

until the hole in

 

 

the frame is

 

 

aligned with the

 

Knob

latch pin. Then,

 

Frame

 

slowly release the

 

 

 

latch knob. Make

 

 

sure that the

 

 

latch pin is fully inserted into the hole.

 

3. Insert the frame

3

Right

pin through the

 

 

Upright

lower end of the

 

 

 

right upright into

 

 

the hole in the

 

 

frame. To protect

 

 

the floor or carpet

 

 

from damage,

 

 

place a mat under

 

Frame Pin

the treadmill.

 

Keep the tread-

 

 

mill out of direct

 

 

sunlight. Do not leave the treadmill in the stor- age position in temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL

Convert the treadmill to the storage position as described on this page.

1.Hold the handrails and place one foot against one of the wheels.

2.Tilt the treadmill back until it rolls freely on the wheels. Carefully move the treadmill to the desired location. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not move the treadmill over an uneven surface.

3.Place one foot against a wheel and carefully lower the treadmill.

HOW TO LOWER THE TREADMILL FOR USE

1.See drawing 3 above. Remove the frame pin.

2.See drawing 2 at the left. Hold the upper end of the frame with your left hand. Pull the latch knob to the right and hold it. Pivot the frame down until it is past the latch pin.

Carefully lower the frame to the floor. CAUTION:

To decrease the possibility of injury, bend your legs and keep your back straight.

3.See drawing 3 above. Insert the frame pin through the right upright into the hole in the frame.

9

Image 9
Contents Model No. WLTL01806.0 Serial No QUESTIONS?Call TOLL-FREE Mon.-Fri., 6 a.m.-6 p.m. MSTImportant Precautions Table of ContentsBefore YOU Begin Assembly Nuts yet Not tighten the Nuts yetSee . Tighten the four M10 Nuts Used in step Page Treadmill Operation Lubricating the Walking PlatformSTEP-BY-STEP Console Operation HOW to Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Lower the Treadmill for USE Sure that Latch pin is fully inserted into the holeHOW to Adjust the Incline Maintenance and Troubleshooting Symptom the Walking Belt does notMove Smoothly Conditioning Guidelines HOW to Measure Your Heart RateExercise Intensity Workout GuidelinesSuggested Stretches Qty Description Part LIST-Model No. WLTL01806.0R0906A Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT