Weslo WCTL29509.0 user manual Operation and Adjustment, PRE-LUBRICATED Walking Belt

Page 12

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

DANGER: Improper connection of the equipment-grounding conductor can result in an increased risk of electric shock. Check with a qualified electrician or service- man if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

Your treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden voltage changes in your homeʼs power. Voltage surges, spikes, and noise interference can result from weather conditions or from other appli- ances being turned on or off. To decrease the possi- bility of

your treadmill being damaged, always use a surge suppressor with your treadmill (see drawing 1 at the right). To purchase a surge suppressor call the telephone number on the front cover of this manual

Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge sup- pressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps. There must be a moni- toring light on the surge suppressor to indicate whether it is functioning properly. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may slow, accelerate or stop unexpectedly, which may result in a fall and serious injury.

This product must be grounded. If it should malfunc- tion or break down, grounding provides a path of least resistance for electric current to reduce the risk of elec-

tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illus- trated in drawing 1 below. A temporary adapter that looks like the adapter illustrated in drawing 2 may be used to connect the surge suppressor to a 2-pole receptacle as shown in drawing 2 if a properly grounded outlet is not available.

1

Grounded Outlet Box

 

 

Surge Suppressor

 

 

Grounding Pin

 

Grounding Pin

2

Grounded Outlet

Grounding Plug

Grounded Outlet Box

 

Adapter

Surge Suppressor

Lug

Metal Screw

The temporary adapter should be used only until a properly grounded outlet (drawing 1) can be installed by a qualified electrician.

The green-colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used it must be held in place by a metal screw. Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified elec- trician to determine if the outlet box cover is grounded before using an adapter.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Contact OUR Customer Service Department DI- Rectly QUESTIONS?Model No. WCTL29509.0 Serial No Table of Contents Important Precautions Treadmill, and before performing the main Before YOU Begin Assembly See the inset drawing. Locate the wire tie Hold the Left Upright 53 so that the two indiCated small holes are on top. Attach the Left Bolts 2. Do not tighten the Bolts yetPage Connector If the Connectors are not CON Make sure that no wires are pinched. StartFully tighten the Bolts yet Steps 10 and 11. Firmly tighten all six M8 15mm BoltsScrews before tightening either of them Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual Mode Insert the key into the consoleStart the walking belt Follow your progress with the track and the dis- playsHOW to USE a Speed Program Measure your heart rate if desiredHOW to Change the Incline of the Treadmill HOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useCompatible with GFCI-equipped outlets Problem The walking belt slows when walked on Walking belt. If the walking belt has shifted toExercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches R0609A DescriptionExploded Drawing A-Model No. WCTL29509.0 R0609A Exploded Drawing B-Model No. WCTL29509.0 R0609A Exploded Drawing C-Model No. WCTL29509.0 R0609A Exploded Drawing D-Model No. WCTL29509.0 R0609A Ordering Replacement Parts Limited Warranty

WCTL29509.0 specifications

The Weslo WCTL29509.0 is a versatile and innovative treadmill designed for home fitness enthusiasts seeking an effective workout solution. With its thoughtfully engineered features, this treadmill caters to a range of fitness levels and goals, making it a popular choice for anyone looking to maintain or improve their physical health.

One of the standout features of the Weslo WCTL29509.0 is its space-saving design. This treadmill is built with a foldable frame that allows users to easily store it away when not in use, making it an ideal option for those who have limited space in their homes. The compact design does not compromise on functionality, as it includes a sturdy and stable deck that can support various workout intensities.

In terms of performance, the Weslo WCTL29509.0 is equipped with a powerful 2.0 CHP motor, providing a smooth and consistent running experience. Users can adjust their workout intensity with a maximum speed of up to 10 miles per hour, catering to both walkers and runners alike. The motor operates quietly, ensuring that you can watch TV or listen to music without distractions during your workout.

The treadmill features an advanced digital display that provides essential workout metrics, including time, speed, distance, and calories burned. This user-friendly interface helps individuals track their progress and stay motivated throughout their fitness journey. Additionally, the Weslo WCTL29509.0 includes several preset workout programs designed by fitness professionals, allowing users to challenge themselves and vary their routine.

Comfort is another critical factor in the Weslo WCTL29509.0’s design. The treadmill is equipped with a cushioned track that absorbs impact, reducing stress on joints during workouts. This makes it an excellent option for those who may have prior injuries or are looking to protect their knees while running.

For those who appreciate some entertainment during their workouts, the Weslo WCTL29509.0 features a built-in audio port that allows users to connect their devices and listen to music through integrated speakers. This feature enhances the overall workout experience, making it more enjoyable and motivating.

In conclusion, the Weslo WCTL29509.0 treadmill combines compact design, powerful performance, and user-friendly features, making it an attractive option for home fitness enthusiasts. Whether you're a beginner or an experienced runner, this treadmill is designed to help you achieve your fitness goals effectively and comfortably.
Top Page Image Contents