Weslo WCTL31304.0 user manual Assembly, Your own Phillips screwdriver Needlenose pliers

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench

and your own Phillips screwdriver and needlenose pliers .

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

For help identifying the assembly hardware, see the drawings below. Note: The assembly hardware and other small parts are packaged in separate part bags. Do not open the part bags until instructed to do so.

1/2” Silver Screw (87)–1

Washer (29)–4 Star Washer (81)–4

3/4” Screw (70)–8 1” Tek Screw (48)–4 Wheel Bolt (86)–2

Crossbar Bolt (56)–2		3” Bolt (47)–4
1. Make sure that the power cord is not plugged in.	1	48
With the help of a second person, carefully tip the		97
treadmill onto its left side. Partially fold the Frame (12) so
that the treadmill will be more stable. Do not fully fold		97
the treadmill until it is completely assembled.
Open part bag A. Attach the four Base Pads (97) to the		12
bottom of the Base (82) with four 1” Tek Screws (48).
		48
		82
		48
		97
		48

6