Weslo Cadence 80 user manual HOW to Change the Incline of the TREAD- Mill

Page 14

HOW TO CHANGE THE INCLINE OF THE TREAD- MILL

To vary the intensity of your exercise, you can change the incline of the treadmill. There are three incline lev- els. Before changing the incline, remove the key and unplug the power cord. Next, fold the treadmill to the storage position (see page 15).

To change the incline, first remove the incline pin from one of the incline legs. Adjust the incline leg to the de- sired position, and then fully reinsert the incline pin.

Adjust the other incline leg in the same way. CAU-

TION: Before using the treadmill, make sure that both incline legs are at the same height and that both incline pins are fully inserted into the incline legs.

After you have adjusted the incline legs, lower the treadmill (see page 16).

Incline		Incline
Pin		Incline
	Incline	Pin
	Incline
	Legs

14

Image 14

Contents Call TOLL-FREE QUESTIONS?Model No Serial No Table of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unplugged Hold the Console Assembly 91 near the Right Make sure that no wires are pinched Top View Be careful not to overtighten the Frame Pivot BoltsRepeat this step on the other side of the Frame PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram HOW to Turn on the PowerHOW to Operate the Console Insert the key into the consoleHOW to Change the Incline of the TREAD- Mill HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyKey Qty Description Key No. Qty. Description30551.0 Exploded Drawing B Model No Exploded Drawing C Model No Ordering Replacement Parts Limited Warranty