Weslo Cadence 80 user manual HOW to Lower the Treadmill for USE

Page 16

HOW TO LOWER THE TREADMILL FOR USE

1.Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Next, lower the frame until it is past the latch pin. Then, release the latch knob.

2.Hold the frame firmly with both hands, and lower it to the floor. To decrease the possibility of injury, bend your legs and keep your back straight.

Latch

Pin

Latch

Knob

Frame

16

Image 16

Contents Model No Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unplugged Hold the Console Assembly 91 near the Right Make sure that no wires are pinched Repeat this step on the other side of the Frame Be careful not to overtighten the Frame Pivot BoltsTop View HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram HOW to Turn on the PowerHOW to Operate the Console Insert the key into the consoleHOW to Change the Incline of the TREAD- Mill HOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyKey Qty Description Key No. Qty. Description30551.0 Exploded Drawing B Model No Exploded Drawing C Model No Ordering Replacement Parts Limited Warranty