Weslo Cadence 80 user manual Make sure that no wires are pinched

Page 9

6.Set the Left and Right Handrails (22, 33) and the Console Assembly (91) on the Uprights (53, 54).

Tighten the four Handrail Bolts (8) with the four Handrail Star Washers (5) into the Left and Right Uprights (53, 54) and the Left and Right Handrails (22, 33). Start all four Handrail Bolts before tightening any of them.

7.Attach the Console Back (73) to the Console Assembly (91) with four Console Back Screws

(4). Make sure that no wires are pinched.

6
			91
	22
		8
		5
	8	5
	8
		33	8
		33	5
			5
		53
			5
			8
			54
7		73
		73
		91
		4
		4

9

Image 9

Contents QUESTIONS? Model No Serial NoCall TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unplugged Hold the Console Assembly 91 near the Right Make sure that no wires are pinched Be careful not to overtighten the Frame Pivot Bolts Repeat this step on the other side of the FrameTop View Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt HOW to Turn on the Power Console DiagramInsert the key into the console HOW to Operate the ConsoleHOW to Change the Incline of the TREAD- Mill HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingProblem The walking belt slows when walked on Exercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencyKey No. Qty. Description Key Qty Description30551.0 Exploded Drawing B Model No Exploded Drawing C Model No Limited Warranty Ordering Replacement Parts