Weslo ex18 Maintenance and Troubleshooting, Problem The power turns off during use, Top

Page 12

MAINTENANCE AND TROUBLESHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 7). Use only a single-outlet surge suppressor that meets all of the specifications described on page 7. Important: The treadmill is not compatible with GFCI-equipped outlets.

b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.

c.Check the circuit breaker located on the treadmill frame near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in.

c

Tripped

Reset

PROBLEM: The power turns off during use

SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see the drawing above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b.Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in.

c.Remove the key from the console. Reinsert the key fully into the console.

d.Check the wire connections under the console (see top of page 13).

e.If the treadmill still will not run, please call our Customer Service Department, toll-free.

PROBLEM: The displays of the console do not function properly

SOLUTION: a. Check the batteries in the console. If the batteries need to be replaced, see BATTERY INSTALLATION on page 8. Most problems are the result of drained batteries.

b.Remove the screws from the hood, and carefully re- move the hood. Locate the Reed Switch (76) and the Magnet (93) on the left side of the Pulley (77). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that there is a gap of about 1/8” between the Magnet and the Reed Switch. If neces- sary, loosen the Small Screw (87) and move the Reed Switch slightly. Retighten the Screw. Re-attach the hood, and run the treadmill for a few minutes to check for a correct speed reading.

44

1/8”

50

 

 

 

 

 

45

87

 

 

Top

 

 

View

 

 

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents QUESTIONS? Model No. WLTL49201 Serial NoCustomer HOT Line Table of Contents Important PrecautionsPage Before YOU Begin Right SideAssembly Sure to push on the head of the Extension LegScrew while tightening it Screws Operation and Adjustment HOW to Plug in the Power CordPerformant Lubetm Walking Belt Diagram of the Console Battery InstallationSTEP-BY-STEP Console Operation Calories FAT Calories HOW to Fold and Move the Treadmill HOW to USE the Hand WeightsHOW to Fold the Treadmill for Storage HOW to Move the Treadmill HOW to Lower the Treadmill for USEMaintenance and Troubleshooting Problem The power turns off during useTop Problem The walking belt slows when walked on Conditioning Guidelines Exercise IntensityWorkout Guidelines Exercise Frequency Suggested StretchesR0403A Qty DescriptionWLTL49201 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT

ex18 specifications

The Weslo EX18 is a versatile and compact elliptical machine designed for home use, catering to fitness enthusiasts seeking an effective cardiovascular workout. With its robust construction and user-friendly features, it provides a range of exercises that promote healthy living and fitness goals.

One of the core features of the Weslo EX18 is its adjustable resistance levels. This allows users to customize their workout intensity, making it accessible for individuals at various fitness levels. Whether you are a beginner or a seasoned athlete, the EX18 can accommodate your needs, helping you gradually increase your strength and endurance.

The machine is equipped with a smooth and quiet operation due to its precision-engineered flywheel. This ensures that workouts remain uninterrupted, making it ideal for shared living spaces. The low-impact nature of the elliptical workout provided by the EX18 reduces stress on the joints while still delivering an effective cardiovascular workout. This characteristic makes it particularly appealing for those recovering from injury or looking to maintain joint health.

Another impressive aspect of the Weslo EX18 is its built-in digital monitor. This feature tracks essential workout metrics, prompting users to stay motivated throughout their session. The monitor displays time, distance, speed, and calories burned, which assists users in setting and achieving fitness goals. Additionally, the EX18 includes built-in workout programs that provide structure and variety to each session, further enhancing the overall experience.

The design of the Weslo EX18 emphasizes user comfort. Its oversized pedals offer ample foot placement options, enhancing stability during exercises. The compact size of the machine also ensures it can fit into smaller spaces, making it an excellent choice for home gyms or apartments.

Lastly, the durable frame construction of the Weslo EX18 promises longevity, providing users with a reliable workout machine for years to come. Overall, the Weslo EX18 combines practical features, thoughtful design, and effective workout capabilities, making it a popular choice among home fitness enthusiasts looking for a comprehensive cardio solution.
Top Page Image Contents