Weslo 200 Operation and Adjustment, PRE-LUBRICATED Walking Belt, HOW to Plug in the Power Cord

Page 10

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deteri- orate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

This product must be earthed. If it should malfunction or break down, earthing provides a path of least resistance for electric cur- rent to reduce the risk of electric shock. This product is equipped with a power cord having an equipment-earthing conductor and an earthing plug. Important: If the power cord is damaged, it must be replaced with a manufacturer-recommended power cord.

See drawing 1. Plug the indicated end of the power cord into the socket on the treadmill.

See drawing 2. Press the pins on the power cord into the metal clips in the adapter as shown. Close the adapter cover over the end of the power cord and tighten the screw in the adapter. Important:

Make sure that the adapter cover is secure and the screw has been tightened before using the power cord.

See drawing 3. Plug the power cord into an appropriate outlet that is properly installed and earthed in accordance with all local codes and ordinances. Important: The treadmill is not compatible with

GFCI-equipped outlets.

1

Socket on treadmill

2

Adapter

 

Screw

Cover

 

Pins

Adapter

Metal

 

 

Clips

3

Outlet

 

DANGER: Improper connection of the equipment-earthing conductor can result in an increased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly earthed. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

10

Image 10
Contents QUESTIONS? Model No. WETL14805.1 Serial NoTable of Contents Important Precautions Page Right Side Before YOU BeginFront BackAssembly Page Touch the Right Handrail 59 to discharge any static Screws and then tighten them Top ViewPRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord GFCI-equipped outletsInsert the key fully into the console STEP-BY-STEP Console OperationStart the walking belt Monitor your progress with the display Measure your heart rate if desiredHOW to Change the Incline of the Treadmill HOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Part LIST-Model No. WETL14805.1 Qty DescriptionPart Identification Chart R0905A Ordering Replacement Parts