Newcon Optik operation manual Night vision attachment NVS-33 is ready for use

The night vision attachment NVS-33 is ready for use.

NVS-33 can be screwed directly into the Newcon 3- 12x50 riflescope. Its design allows such mounting without any additional adapters. To attach NVS-33 in front of NC 3-12x50, proceed as described above without using threaded adapters.

Due to different designs of the daytime riflescopes we cannot guarantee that threaded connection is supported in all cases. This design may be not strong enough to hold the night vision attachment during shooting. In such case, the ring and objective thread of the daytime scope may be damaged.

The manufacturer is not responsible for use of NVS-33 night sight attachment by a threaded connection on the scope models other than those, which were approved by Newcon Optik.

There is no need to re-zero daytime scope or perform any additional adjustment when NVS-33 is installed on the rifle.

__________________________________________

13