8. TROUBLESHOOTING
The scope does not turn on
Check whether the batteries are installed properly. Check the charge of the batteries. Replace if they are weak. Do not mix old batteries with new ones.
The target does not appear in focus
Bring the target to the center of the image. By turning the knob 7 (Fig.1) achieve the clearest target acquisition on the screen. If
If the image still does not seem to be in focus, clean the lenses. They could be foggy or dusty.
Image has disappeared
If the objective lens of switched on
If the image has been lost at the moment of a shot, check contacts in the battery compartment.
__________________________________________
34