Newcon Optik NVS-33 operation manual Use in a dark time as a 2x night vision monocular

Page 29

6.6.Use in a dark time as a 2x night vision monocular

Operation procedure:

1.Screw the optional М-540 optical monocular into the eyepiece of the NVS-33 night vision attachment.

2.Open the objective lens cover (9) (Fig.1).

3.Turn the switch (5) (Fig.1) of the device into ON position. You should see a yellowish-green light through the eyepiece of a daytime riflescope (the device works in passive mode).

4.Choose the object of observation.

5.If necessary, turn on the IR-illuminator (5) (Fig.2) (Special order only) as described above (the device works in active mode).

6.Turn off the switch (5) (Fig.1) after work is over.

7.Close the objective lens cover.

__________________________________________

29

Image 29
Contents Night Vision Attachment  Never Important InformationTable of Contents Overview Brief DescriptionKey features of NVS-33 Design of NVS-33 Page Optical SpecificationsElectrical parameters Mechanical characteristicsDelivery SET Optional accessories Installation with thread usage Installation on a RifleNight vision attachment NVS-33 is ready for use Installation with a riflescope mounting adapter NC540 Page Page Page Installation on a Picatinny rail Page Page Operation Instructions Page Page Testing NVS-33 at night with daytime scope Testing NVS-33 at nightOperation at night Page Page Page Use in a dark time as a 2x night vision monocular Operation with remote control Page Storage and Maintenance Page  The scope does not turn on Troubleshooting The target does not appear in focus  Image has disappeared Black dots on the screen Warranty Condensation accumulates on the parts What This Warranty Does Not Cover US Customers Customer SupportAcceptance Certificate Page Newcon OPTIK