Newcon Optik NVS-33 operation manual

Page 23

6.2.Testing NVS-33 in the daytime

Daytime mode of NVS-33 was designed for testing purposes only. Image may be fuzzy.

To test the device in the daylight:

1.Turn switch (5) (Fig.1) into ON position.

2.Direct the device at an object within 10-20 m from the viewer.

3.Turning the focus knob (7) (Fig.1) adjust focus to obtain

4.The sharpest image visible through the eyepiece.

Keep the objective lens cover closed during daytime. Do not direct night vision attachment to bright sources of light, the Sun, highly reflective surfaces and similar objects. This may damage the image intensifier tube inside.

__________________________________________

Image 23

Contents Night Vision Attachment  Never Important InformationTable of Contents Overview Brief DescriptionKey features of NVS-33 Design of NVS-33 Page Optical SpecificationsElectrical parameters Mechanical characteristicsDelivery SET Optional accessories Installation with thread usage Installation on a RifleNight vision attachment NVS-33 is ready for use Installation with a riflescope mounting adapter NC540 Page Page Page Installation on a Picatinny rail Page Page Operation Instructions Page Page Testing NVS-33 at night with daytime scope Testing NVS-33 at nightOperation at night Page Page Page Use in a dark time as a 2x night vision monocular Operation with remote control Page Storage and Maintenance Page  Image has disappeared Troubleshooting The scope does not turn on  The target does not appear in focus Black dots on the screen Warranty Condensation accumulates on the parts What This Warranty Does Not Cover US Customers Customer SupportAcceptance Certificate Page Newcon OPTIK