Newcon Optik operation manual Testing NVS-33 at night with daytime scope

6.3.Testing NVS-33 at night

To test NVS-33 in darkness:

1.Take off the lens cover (9) (Fig.1)

2.Turn on the device using switch (5) (Fig.1)

3.By turning knob (7) (Fig.1) obtain clear image of the object.

6.4.Testing NVS-33 at night with daytime scope

1.Install NVS-33 (see Chapter 5

“INSTALLATION ON A RIFLE”)

2.Take off the lens cap (9) (Fig.1).

3.Turn on the device using on/off switch (5) (Fig.1). Greenish image must be seen through the daytime scope.

4.Select necessary zoom of the daytime scope. By turning the knob (7) (Fig.1) of NVS-33 acquire the target through daytime scope.

__________________________________________

24