Newcon Optik LAM 3 IR operation manual CARE, Storage and Transportation, General

Page 20

5.CARE, STORAGE AND TRANSPORTATION

General

LAM is a sophisticated precise optical instrument

equipped with electronics. Therefore, it should be handled

with due care.

-Never disassemble LAM.

-Keep away from direct sunlight, impacts, dust, moisture, and sharp changes of temperature.

-Do not store LAM at temperatures higher than 70oC (158oF). Keep away from heating appliances and central heating.

-Do not touch the optical surfaces with fingers. Doing so may damage the anti-reflection coating.

-Avoid shocks and sharp jolts.

-Clean optical surfaces only with professional camera lens cleaning supplies.

-Use soft clean cloth to wipe the exterior of LAM.

-Remove battery when storing LAM for long period of time.

-All repairs must be performed by an authorized service.

16

Page 19 Page 21
Image 20
Page 19 Page 21
Contents LAM 3 IR Laser Radiation -AVOID Exposure to the Beam Important Information Read prior to activationPage Contents Brief description LAM 3IR Appearance Front viewPage Page ILP Page Page Delivery SET Standard delivery setSpecifications Aimer IlluminatorOperation Instructions Hazardous for Your EyesMounting LAM on a weapon Adjusting LAM on a weaponAdjusting with help of laser boresight Adjusting with iron weapon sight Aiming Preparing LAM for transportation CARE, Storage and Transportation GeneralTo apply new layer of lubricant Long-term storageTo remove old layer of lubricant Page Transportation Troubleshooting LED indicator is off when switch is onWarranty What This Warranty Does Not CoverPage Customer Support Quality Certificate Page Page Page Newcon OPTIK
Top Page Image Contents