Newcon Optik LAM 3 IR operation manual

Page 9

LAM consists of three laser emitters – IR aimer (4, Fig. 1), visible aimer (5, Fig.1) and IR illuminator (7, Fig. 1) – combined in one housing (3, Fig. 1) with interaxis distance of 44.8 millimeters. LAM is powered by a lithium battery (CR123 type). The battery is installed between aimer and illuminator and covered with battery compartment cover (6, Fig.1), which is attached to the housing by a rubber band.

The junction of battery compartment cover (6, Fig. 1) and housing (3, Fig. 1) is sealed with rubber O-ring. A spare O-ring is included in the standard delivery set.

Quick release lever mount (9, Fig.1) fixes LAM on a weapon (Picatinny rail MIL-STD-1913).

Beam divergence can be changed in between 3 and 105 mrad (3’-4º30’) by turning the grooved adjustment ring (8, Fig. 1).

Operating modes switch (13, Fig.2) has the following positions:

5

Page 8 Page 10
Image 9
Page 8 Page 10
Contents LAM 3 IR Laser Radiation -AVOID Exposure to the Beam Read prior to activation Important InformationPage Contents Brief description Front view LAM 3IR AppearancePage Page ILP Page Page Standard delivery set Delivery SETAimer Illuminator SpecificationsHazardous for Your Eyes Operation InstructionsAdjusting LAM on a weapon Adjusting with help of laser boresightMounting LAM on a weapon Adjusting with iron weapon sight Aiming Preparing LAM for transportation General CARE, Storage and TransportationLong-term storage To remove old layer of lubricantTo apply new layer of lubricant Page Transportation LED indicator is off when switch is on TroubleshootingWhat This Warranty Does Not Cover WarrantyPage Customer Support Quality Certificate Page Page Page Newcon OPTIK
Top Page Image Contents