Newcon Optik LAM 3 IR operation manual Long-term storage, To remove old layer of lubricant

Page 21

If LAM was exposed to salt water it should be rinsed in fresh water and dried outside at no more than 55oC.

Long-term storage

When preparing for long-term storage, cover the external metal surfaces of LAM with protective lubricant. Each 4 (four) years old layer of lubricant should be removed and new layer be applied.

To remove old layer of lubricant:

-Wipe LAM with clean dry cloth,

-Degrease metal surfaces of LAM with benzene moistened cloth,

-Dry LAM out-of-doors.

Do not touch unit’s metal surfaces with fingers after

cleaning.

To apply new layer of lubricant:

-Within two hours from the cleaning apply an even 0.2-0.5 mm thick layer of lubricant on metal surfaces with a brush.

-Do not cover plastic parts.

17

Image 21

Contents LAM 3 IR Laser Radiation -AVOID Exposure to the Beam Read prior to activation Important InformationPage Contents Brief description Front view LAM 3IR AppearancePage Page ILP Page Page Standard delivery set Delivery SETAimer Illuminator SpecificationsHazardous for Your Eyes Operation InstructionsAdjusting LAM on a weapon Adjusting with help of laser boresightMounting LAM on a weapon Adjusting with iron weapon sight Aiming Preparing LAM for transportation General CARE, Storage and TransportationLong-term storage To remove old layer of lubricantTo apply new layer of lubricant Page Transportation LED indicator is off when switch is on TroubleshootingWhat This Warranty Does Not Cover WarrantyPage Customer Support Quality Certificate Page Page Page Newcon OPTIK