Sears NTL61011.1 user manual Handrails 71, 72. Make sure that no wires

10. Set the console assembly on the Left and Right	10			Console
Handrails (71, 72). Make sure that no wires
are pinched. Insert the excess Upright Wire				Assembly
(70) into the Left Handrail.
Attach the console assembly to the brackets
on the Handrails (71, 72) with two 5/16" x 1"
Screws (7) and two 5/16" Star Washers (8).
Start both Screws, and then tighten them.
			87
		72			70
					71
		8
					8
		7
					7
11. Attach the two Console Clamps (96) to the con-	11		Console
sole assembly with four #8 x 3/4" Screws (6).
See step 3. Tighten all six 3/8" x 4" Screws (4).			Assembly
			96
			6
12. Identify the Left and Right Trays (97, 98), which	12
are marked “L” and “R.” Orient the Trays as		Console
shown and attach each Tray with four #8 x 3/4"
		Assembly
Screws. Start all of the Screws before tight-
ening them. Be careful not to overtighten the
Screws.
			98	97
		6	6	6	6
	12