Sears NTL61011.1 user manual Raise the Frame 49 to the position shown

Page 13

13.Raise the Frame (49) to the position shown.

Have a second person hold the Frame until this step is completed.

Orient the Storage Latch (51) so that the large barrel and the latch knob are oriented as shown.

Attach the lower end of the Storage Latch (51) to the Base (80) with a 3/8" x 2" Bolt (12) and a 3/8" Nut (3).

Attach the upper end of the Storage Latch (51) to the Frame (49) with a 3/8" x 2" Bolt (12) and a 3/8" Nut (3).

14.Attach a Wheel (81) to the Base (80) with a 3/8" x 2 1/2" Bolt (2) and a 3/8" Nut (3). Do not over- tighten the Nut; the Wheel must turn freely.

Attach the other Wheel (81) to the other side of the Base (80) in the same way.

Lower the Frame (not shown) (see HOW TO LOWER THE TREADMILL FOR USE on page 22).

13
	49
	3	12
Latch Knob			51
			51
Large Barrel
		3	12
			12
		80
14
2
	3	80
81	3			3
81				3
			81	2

15.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plas- tic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.

Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 24 and 25).

13

Image 13

Contents Model No. NTL61011.1 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Part Identification Chart Make sure that the power cord is unplugged AssemblyAge the Upright Wire Wire Page Screws, but do not tighten them yet Again. if YOU do not Connect the CON Start all four Screws, and then tightenStart both Screws, and then tighten them Handrails 71, 72. Make sure that no wiresRaise the Frame 49 to the position shown HOW to Plug in the Power Cord Operation AND ADJUSTMENTConsole Diagram Features of the Console HOW to USE the Manual Mode HOW to Turn on the PowerSelect the manual mode Insert the key into the consoleFollow your progress with the displays Change the incline of the treadmill as desiredMeasure your heart rate if desired HOW to USE the Stereo Sound SystemSelect an onboard workout HOW to USE AN Onboard WorkoutStart the workout Insert the iFit Live module into the console HOW to USE AN IFIT LIVE WorkoutSelect an iFit Live workout Start the workout. See onMetric Information ModeHOW to Fold the Treadmill HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USESymptom The power does not turn on TroubleshootingSymptom The power turns off during use Power CordSymptom The walking belt slows when walked on Page Exercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencyKey No. Qty Description Part ListExploded Drawing Exploded Drawing B Exploded Drawing C Exploded Drawing D Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT