Industry Sector, IA&DT
5.The software now switches automatically to the project view containing the opened hardware configuration in the device view. To ensure that the software will access the correct CPU later, the 'ETHERNET address' of the CPU has to be set.
(→ Properties → General → ETHERNET address → IP address: 192.168.0.80 → Subnet mask: 255.255.255.0)
6.Additional modules can be added for the hardware catalog (on the right). We select the signal module 'DI16/DO16' with 16 digital inputs and 16 digital outputs and drag this to slot 4.
(→ Hardware catalog → DI/DO → DI16/DO16 x 24V / 0.5A → 6ES7
SCE Training Curriculum | Page 14 of 30 | To be used only at Educational and R&D Facilities |
TIA Portal Module |
| Unrestricted / © Siemens AG 2013. All Rights Reserved |
| ||
|
|
|