Siemens TOA portal module 040-020 manual Learning objective, Requirements

Industry Sector, IA&DT

1.Preface

The content of the SCE_EN_040-020 module is part of the 'Other Programming Languages' training unit and represents a fast entry point for programming the SIMATIC S7 300 with the S7-SCLprogramming language with the TIA Portal.

Other programming languages Module 40

Basics of PLC programming Module 10, Module 20

Advanced functions for PLC programming Module 30

PROFIBUS	PROFINET
Module 60	Module 70

Plant simulation with SIMIT Module 150

AS interface

Module 50

Safety technology Module 80

Sensor technology Module 110

Process visualization (HMI) Module 90

Drive technology Module 100

Learning objective:

This module describes the basic functions of the S7 SCL development environment. Test functions for eliminating logical programming errors will also be shown.

Requirements:

To successfully work through this module, the following knowledge is required:

∙Proficiency in working with Windows

∙Basics of PLC programming with STEP 7 Professional V11 (e.g. modules 020- to 030-)

∙Basic information on programming in high-level languages, such as Pascal.

SCE Training Curriculum	Page 4 of 30	To be used only at Educational and R&D Facilities
TIA Portal Module 040-020, Edition 03/2013		Unrestricted / © Siemens AG 2013. All Rights Reserved
SCE_EN_040-020_R1209_Startup Programming in High-Level Languages with S7-SCL and SIMATIC S7-300