Siemens TOA portal module 040-020 manual Creating a program

Page 16

Industry Sector, IA&DT

5.2Creating a program

1.Open the Default tag table' and enter the 'operands' with their name and data type.

(→ Controller 001[CPU315F-2 PN/DP] → PLC-tags→Default tag table → Enter operands)

SCE Training Curriculum	Page 16 of 30	To be used only at Educational and R&D Facilities
TIA Portal Module 040-020, Edition 03/2013		Unrestricted / © Siemens AG 2013. All Rights Reserved
SCE_EN_040-020_R1209_Startup Programming in High-Level Languages with S7-SCL and SIMATIC S7-300

Image 16

Contents TIA Portal Module Suitable SCE trainer packages for these training curriculums Industry Sector, IA&DT Learning objective RequirementsRequired hardware and software Industry Sector, IA&DT Editor / compiler S7-SCL for S7-300/400Debugger Description of task Default tag tableAssignment list / tag table Structure of the tank content sample task Program structureInterface of the block calculatetankcontent FC140 Type Designation FunctionInterface of the function FC140 Calculatetankcontent Function call Representation in FBDCreating a project and configuring hardware Industry Sector, IA&DT Industry Sector, IA&DT Industry Sector, IA&DT Creating a program Industry Sector, IA&DT Diagram Industry Sector, IA&DT Industry Sector, IA&DT Industry Sector, IA&DT Industry Sector, IA&DT Test program Industry Sector, IA&DT Mode on. → Expanding the program Expanding the assignment list / tag tableIndustry Sector, IA&DT Industry Sector, IA&DT Industry Sector, IA&DT Industry Sector, IA&DT