Sharp AN-PR1000H Setting the clock, To confirm the time display, To readjust the clock

Page 19

Setting the clock

AN-PR1000H

 

By setting the unit to the correct time, you can use it not only as a clock but also for timer playback.

You can set the clock even when the unit is in the stand-by mode. In this example, the clock is set for the 24-hour (0:00) display

1 Hold down the SHIFT button and press the CLOCK button. Within 5 seconds, press the or button to select CLOCK ADJUST and then press the ENTER button.

2 Hold down the SHIFT button and press the or button to select the 24-hour or 12-hour display and then press the ENTER button.

"0:00"

 

The 24-hour display will appear. (0:00 - 23:59)

 

"AM 12:00"

 

The 12-hour display will appear. (AM 12:00 - PM 11:59)

 

 

"AM 0:00"

 

The 12-hour display will appear. (AM 0:00 - PM 11:59)

 

 

Note that this can only be set when the unit is first installed or it has been reset (see page 40).

3 Hold down the SHIFT button and press the or button to adjust the hour and then press the ENTER button.

Press the or button once to advance the time by 1 hour. Hold it down to advance continuously.

When the 12-hour display is selected, "AM" will change automatically to "PM".

4 Hold down the SHIFT button and press the or button to adjust the minutes and then press the ENTER button.

Press the or button once to advance the time by 1 minute. Hold it down to advance continuously.

The hour will not advance even if minutes advance from "59" to "00".

The clock starts from "0" second (seconds are not displayed).

The time disappears after approx.5 seconds.

To confirm the time display:

Hold down the SHIFT button and press the DISPLAY button.

The time display will appear for about 5 seconds.

Note:

The "ADJUST" or time will flash at the push of the SHIFT and DISPLAY buttons when the AC power supply is restored after a power failure or unplugging the unit.

To readjust the clock:

Perform "Setting the clock" from step 1. If the "ADJUST" is not flashing in step 1, step 2 (for selecting the 24-hour or 12-hour display) will be skipped.

To change the 24-hour or 12-hour display:

1 Clear all the programmed contents. [Refer to "Clearing all the memory (reset)" on page 40 for details].

2 Perform "Setting the clock" from the beginning.

Preparation for Use

1

2

3

4

5

6

7

8

19

06/3/14

AN-PR1000_EN.fm

TINSEA127AWZZ

Page 18 Page 20
Image 19
Page 18 Page 20
Contents AN-PR1000H AN-PR1000HSpecial Notes ContentsGeneral AccessoriesGeneral PrecautionsVolume control General InformationMain unit front panel Main unit rear panel Controls and indicatorsInformation GeneralControls and indicators Display Remote control AN-PR1000HControls and indicators18, 26, 28, 32 Review/Cue Buttons Play Button Volume Up and Down ButtonsON/STAND-BY button Menu/Top Menu Button Cursor Buttons Return ButtonSupplied FM aerial System connectionsPreparation for Use External FM aerialSubwoofer connection Using other subwooferSystem connections For UsePlacing the TV or other equipment Falling prevention AN-PR1000HAudio connections to TVs, DVD players, VCRs, etc Connecting a TV, etcConnecting a VCR, etc Connecting a DVD player, etcTo turn the power on AC power connectionConnecting a digital tuner, etc Connecting the AC power leadClose the cover Precautions for battery use Remote controlBattery installation Test of the remote controlTo change the display brightness 2 levels AN-PR1000HGeneral controlMuting Subwoofer level controlTo change the 24-hour or 12-hour display Setting the clockTo readjust the clock To confirm the time displayListening to the playback sound from DVD players, VCRs, etc Remote control operationBasic Operation Preset sound modes and sound image Enjoying surround sound sound modePreset sound mode Enjoying surround sound sound modePress the VS button Dolby Virtual Speaker DVS sound modeDolby Virtual Speaker is deactivated Press the button for your desired mode Audistry sound modeDolby Digital DTS Digital Theatre SystemsDolby Pro Logic AN-PR1000HListening to the radio TuningTo recall a memorised station To erase entire preset memoryRadio Memorising a stationInformation provided by RDS AN-PR1000HUsing the Radio Data System RDSAdvanced Features You can control the RDS by using the remote control onlyTo stop the Aspm operation before it is complete Using the Auto Station Programme Memory AspmTo erase all of the contents of preset memory Press the Tuner button to select the FM stereo bandIf you select the traffic programme AN-PR1000HUsing the Radio Data System RDSTo recall stations in memory To specify programme types and select stations PTY searchNews Set the time to finish as in steps 3 and 4 above Timer and sleep operationSetting the timer Before setting timerTo use timer and sleep operation together Setting the sleep timerTo check the timer setting Timer and sleep operationWatching TV Operating the TV or DVD player with the remote controlPlaying a DVD Action Buttons to be Operation procedure Used Operating the TV or DVD player with the remote controlVarious operations of DVD player DVD player setting number Changing the manufacturer setting of the remote controlTo change the TV manufacturer setting To change the DVD player manufacturer settingTV setting number Changing the manufacturer setting of the remote controlSymptom Possible cause Troubleshooting chartReferences Error indicators and warningsTroubleshooting chart When the protection circuit is activatedSpecifications MaintenanceCleaning the cabinet Memo 1300 135 Warranty

AN-PR1000H specifications

The Sharp AN-PR1000H is an advanced air purifier that combines innovative technology and user-centric features to deliver exceptional indoor air quality. Designed for households and offices, this model stands out with its sleek design and effective performance, making it an appealing choice for those looking to improve their environment.

One of the key features of the AN-PR1000H is its powerful air filtration system. It employs a multi-layer filtration process that includes a pre-filter, activated carbon filter, and a high-performance HEPA filter. The HEPA filter captures up to 99.97% of airborne particles as small as 0.3 microns, including dust, pollen, and pet dander. The activated carbon filter effectively neutralizes odors and volatile organic compounds (VOCs), ensuring that the air you breathe is not only clean but also fresh.

Incorporating Sharp's exclusive Plasmacluster technology, the AN-PR1000H emits positive and negative ions into the air. This technology helps to reduce allergens, mold, and bacteria, contributing to a healthier living space. The ions attach to airborne particles, causing them to clump together and fall out of the air, making it easier for the filters to capture them.

The AN-PR1000H is designed with user convenience in mind. It features an intuitive control panel that allows users to adjust settings with ease. With multiple fan speed options and an automatic mode that adjusts airflow based on air quality, this air purifier caters to different needs and preferences. A built-in air quality sensor monitors the environment and provides real-time feedback, allowing users to be informed about the air quality in their space.

Another noteworthy aspect of the AN-PR1000H is its quiet operation. The unit runs quietly, making it perfect for use in bedrooms, nurseries, and offices where noise levels need to be kept to a minimum. Its compact design allows for easy placement in various settings without taking up too much space.

For added convenience, the AN-PR1000H features a filter replacement indicator that alerts users when it's time to change the filters, ensuring optimal performance at all times. With a stylish design, advanced filtration technology, and user-friendly features, the Sharp AN-PR1000H is an excellent choice for anyone looking to enhance their indoor air quality and overall well-being.
Top Page Image Contents