Sharp AN-PR1000H operation manual Precautions, General Information, Cooling fan, Volume control

Page 4

AN-PR1000H

Precautions

General Information

4

General

Use the unit on a firm, level surface free from vibration.

Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.) which generate electrical noise.

Do not expose the unit to moisture, to temperatures higher than 60˚C (140˚F) or to extremely low temperatures.

If the unit does not work properly, unplug and plug it in again. Then turn on the unit.

In case of an electrical storm, unplug the unit for safe- ty.

Hold the AC power plug by the head when removing it from the wall socket, as pulling the lead can damage internal wires.

The AC power plug is used as disconnect device and shall always remain readily operable.

Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility.

The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.

No naked flame sources, such as lighted candles, should be placed on the apparatus.

Attention should be drawn to the environmental aspects of battery disposal. This unit should only be used within the range of 5˚C - 35˚C (41˚F - 95˚F).

l

Warning:

The voltage used must be the same as that specified by this unit. Using this product with a higher voltage other than that specified is dangerous and may result in a fire or other types of accident, causing damage. SHARP will not be held responsible for any damage resulting from the use of this unit with a voltage other than that specified.

Cooling fan

This unit is fitted with a cooling fan at the rear for improved cooling. Do not cover the opening in this section with any obstacles.

Cooling fan

Caution:

The unit will get warm whilst being used. Do not touch the warm areas of the unit for prolonged periods to avoid injury.

This unit is equipped with a special function which protects the amplifier circuit from damages. When it is activated, the sound switch is turned off. In this case, set the unit to the stand-by mode and turn on again.

Volume control

The sound level at a given volume setting depends on speaker efficiency, location, and various other factors. It is advisable to avoid exposure to high volume levels. Do not turn the volume on to full at switch on and listen to music at moderate levels.

06/3/14

AN-PR1000_EN.fm

TINSEA127AWZZ

Page 3 Page 5
Image 4
Page 3 Page 5
Contents AN-PR1000H Contents AN-PR1000HSpecial NotesAccessories GeneralPrecautions Volume controlGeneral Information GeneralControls and indicators InformationGeneral Main unit front panel Main unit rear panelControls and indicators Display Remote control AN-PR1000HControls and indicators18, 26, 28, 32 Volume Up and Down Buttons ON/STAND-BY button Menu/Top Menu ButtonCursor Buttons Return Button Review/Cue Buttons Play ButtonSystem connections Preparation for UseExternal FM aerial Supplied FM aerialUsing other subwoofer Subwoofer connectionSystem connections For UsePlacing the TV or other equipment Falling prevention Connecting a TV, etc AN-PR1000HAudio connections to TVs, DVD players, VCRs, etcConnecting a DVD player, etc Connecting a VCR, etcAC power connection Connecting a digital tuner, etcConnecting the AC power lead To turn the power onRemote control Battery installationTest of the remote control Close the cover Precautions for battery useAN-PR1000HGeneral control MutingSubwoofer level control To change the display brightness 2 levelsSetting the clock To readjust the clockTo confirm the time display To change the 24-hour or 12-hour displayListening to the playback sound from DVD players, VCRs, etc Remote control operationBasic Operation Enjoying surround sound sound mode Preset sound modes and sound imageEnjoying surround sound sound mode Preset sound modePress the VS button Dolby Virtual Speaker DVS sound modeDolby Virtual Speaker is deactivated Audistry sound mode Press the button for your desired modeDolby Digital DTS Digital Theatre SystemsDolby Pro Logic Tuning AN-PR1000HListening to the radioTo erase entire preset memory RadioMemorising a station To recall a memorised stationAN-PR1000HUsing the Radio Data System RDS Advanced FeaturesYou can control the RDS by using the remote control only Information provided by RDSUsing the Auto Station Programme Memory Aspm To erase all of the contents of preset memoryPress the Tuner button to select the FM stereo band To stop the Aspm operation before it is completeAN-PR1000HUsing the Radio Data System RDS To recall stations in memoryTo specify programme types and select stations PTY search If you select the traffic programmeNews Timer and sleep operation Setting the timerBefore setting timer Set the time to finish as in steps 3 and 4 aboveSetting the sleep timer To use timer and sleep operation togetherTimer and sleep operation To check the timer settingWatching TV Operating the TV or DVD player with the remote controlPlaying a DVD Action Buttons to be Operation procedure Used Operating the TV or DVD player with the remote controlVarious operations of DVD player Changing the manufacturer setting of the remote control To change the TV manufacturer settingTo change the DVD player manufacturer setting DVD player setting numberChanging the manufacturer setting of the remote control TV setting numberTroubleshooting chart Symptom Possible causeError indicators and warnings Troubleshooting chartWhen the protection circuit is activated ReferencesSpecifications MaintenanceCleaning the cabinet Memo 1300 135 Warranty

AN-PR1000H specifications

The Sharp AN-PR1000H is an advanced air purifier that combines innovative technology and user-centric features to deliver exceptional indoor air quality. Designed for households and offices, this model stands out with its sleek design and effective performance, making it an appealing choice for those looking to improve their environment.

One of the key features of the AN-PR1000H is its powerful air filtration system. It employs a multi-layer filtration process that includes a pre-filter, activated carbon filter, and a high-performance HEPA filter. The HEPA filter captures up to 99.97% of airborne particles as small as 0.3 microns, including dust, pollen, and pet dander. The activated carbon filter effectively neutralizes odors and volatile organic compounds (VOCs), ensuring that the air you breathe is not only clean but also fresh.

Incorporating Sharp's exclusive Plasmacluster technology, the AN-PR1000H emits positive and negative ions into the air. This technology helps to reduce allergens, mold, and bacteria, contributing to a healthier living space. The ions attach to airborne particles, causing them to clump together and fall out of the air, making it easier for the filters to capture them.

The AN-PR1000H is designed with user convenience in mind. It features an intuitive control panel that allows users to adjust settings with ease. With multiple fan speed options and an automatic mode that adjusts airflow based on air quality, this air purifier caters to different needs and preferences. A built-in air quality sensor monitors the environment and provides real-time feedback, allowing users to be informed about the air quality in their space.

Another noteworthy aspect of the AN-PR1000H is its quiet operation. The unit runs quietly, making it perfect for use in bedrooms, nurseries, and offices where noise levels need to be kept to a minimum. Its compact design allows for easy placement in various settings without taking up too much space.

For added convenience, the AN-PR1000H features a filter replacement indicator that alerts users when it's time to change the filters, ensuring optimal performance at all times. With a stylish design, advanced filtration technology, and user-friendly features, the Sharp AN-PR1000H is an excellent choice for anyone looking to enhance their indoor air quality and overall well-being.
Top Page Image Contents