Smooth Fitness SMOOTH 9.6H To Custom Program User U1 thru U4, To Review / Change a User Program

Page 11

To Custom Program User (U1 thru U4):

Step 1:

Refer to Select a Program. Repeat Step 1 & 2. Press and release the

 

SELECT

key past P4 to user U1. There are 4 available.

Step 2:

Use the FASTsSLOWt speed keys to make a speed entry. Display will

 

show desired speed and U1-1. Use the blue incline Up + / Down - keys to

 

make an incline entry.

 

 

 

Step 3:

Press and release the Shift

s

key to advance to segment 2. Display will

 

 

show U1-2. Use FASTsSLOWt keys to adjust to desired speed for that

 

segment. Use the blue incline Up + / Down - keys to make an incline entry.

Step 4:

Repeat above procedures until all 10 segments are programmed.

Step 5:

Press and release the

 

key to begin exercise. Exercise

START BELT

is now held in memory unless changed or erased.

Note: You may adjust speed and or incline anytime during a workout. These values will not be held in memory.

To Review / Change a User Program:

Follow instructions on page 9 To Review/Change a Program. Any speed and or incline change before belt movement is held in memory.

To Erase a User Defined Program:

STEP 1:

Choose the user program to be erased. U1 for example.

STEP 2:

Press both sShift

s

keys at the same time for 3 seconds.

 

cline values will be cleared and cannot be recovered.

Speed and in-

Smooth 9.6 2/06/01

10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Smooth 9.6H Save These Instructions Think Safety Important Safety InstructionsRead all instructions before using this appliance Grounding Instructions Important Electrical InformationFreight damage Treadmill AssemblyDealer must provide the following minimum To Use Safety Tether CordImportant Operation Instructions Operation of Your New Treadmill Speed / Incline Repeat FeaturePause Feature Pace FeatureDot Matrix Display Panel Dim FeatureHour Meter Feature To Turn Treadmill OffDefinition of the Factory Defined Programs Program DescriptionsFactory Defined Exercise Programs Enter Programmable Operation of Your TreadmillTo Select a Program To Review/Change a ProgramSelect To Custom Program User U1 thru U4To Review / Change a User Program To Erase a User Defined ProgramTarget Heart Rate Training ChartTarget Heart Rate Using a PolarTM Heart Rate Transmitter Heart Rate Control Areas to look for on interference Technical Specifications of Heart Rate ControlErratic Operation Range of Actual Heart Rate Change in InclineHeart Rate Monitor Only Heart Rate Control OperationBelt Adjustments General MaintenanceLubrication Treadbelt Tracking AdjustmentSOLUTION/CAUSE Service Checklist Diagnosis GuideProblem Ship RD., Suite C, MT. LAUREL, NJ Treadmill Drive Motor 10 Year Warranty Addendum
Top Page Image Contents