STEP 6: Place the treadmill in operating position. Make certain cables from upper computer do not come in contact with motor fan. Apply AC power. Start the unit and observe belt tracking. Unit must be reasonably level for proper tracking. Test treadmill basic operation. This includes noise, motor performance, etc.
STEP 7: Install motor hood and secure with (2) black phillips head screws removed in step 4. Front of motor hood is not secured.
The dealer must provide the following (minimum):
nFollow the belt tracking instructions closely in order to ensure proper belt tension
and path.
nWalk on the belt at slow speeds under 2.5 mph for a few minutes in order to break
in | the belt/deck lubricant. |
nMake certain treadmill is electrically grounded.
Contact Smooth
Service
Sales
Smooth 9.1 / 9.6 2/06/01
4