265.65i TREADMILL
TROUBLESHOOTING
|
|
|
Problem | Reason | Fix |
Treadmill stops suddenly | Safety key fell off | Replace the safety key. |
| Blown fuse | Change fuse |
| Power cord not plugged in | Plug into outlet |
|
|
|
| Electronic problem | Call an authorized service |
|
| technician |
E01 | Stop button is held during | Remove and replace safety |
| program set up | key to reset. |
| Data cable loose or defective | Reconnect or Change the |
|
| wire |
| Computer could be defective | Call an authorized service |
|
| technician |
|
|
|
| Transformer could be |
|
| defective |
|
| Controller could be defective |
|
E02 | Motor wire connection is | Reconnect the wire or Call |
| loose or motor is defective | an authorized service |
|
| technician |
|
|
|
| The connection wire |
|
| between the motor and |
|
| controller is loose or |
|
| controller defective |
|
E 03 | Incorrect speed sensor | Adjust the speed sensor |
| position |
|
| Improper speed sensor wire | Reconnect the wire. |
| connection |
|
| Speed sensor could be | Replace the speed sensor |
| defective |
|
| Controller could be defective | Call an authorized service |
|
| technician |
E05 | Controller could be defective | Call an authorized service |
|
| technician |
| Motor could be defective | Call an authorized service |
|
| technician |
Computer cannot sense the | Check and reset the safety | |
| safety key signal | key. |
No belt movement | Motor is not receiving power | Call an authorized service |
|
| technician |
Erratic display function | Computer memory loss | Turn off and unplug the |
|
| treadmill for 5 minutes and |
|
| retry. |