IBM S84H-4552-00 manual List, Min Max

Power Supply Connector	.5/
1	2

		19		20
Pin		Signal		V dc	V dc
				Min.	Max.
2,	3	GND		—	—
4		SUB	12	+11.4	+12.6
5		GND		—	—
6,	7	+12	volts	+11.4	+12.6
8		GND		—	—
9—11		+3.3		+3.0	+3.6
12—14		GND		—	—
15—17		+5		+4.75	+5.25
18—20		GND		—	—

Checking	the	Installed		Devices		List
If a device is installed						but	the		icon	appears in a gray shade
rather	than	a	dark	shade		on the		basic		diagnostics screen,
the device is defective. Reseat the										device	connectors. If
the symptom		remains,		replace		the device or the system
board. If needed, adjust the contrast control to clearly
distinguish		the	shades		of	the	icon.
If a device that is not						installed			appears in		a dark shade (for
example, FDD-2 appears in a						dark		shadeNO		when
second	FDD	is	installed),		do	the		following:

1.	Replace	firstthe device in	the configuration, such as
	an FDD-1,	HDD-1.
2.	If the problem remains,		replace the system board.

The PCMCIA-1, parallel, and serial icons are always displayed in a dark shade because the icons represent

subsystems of the system board		and not the attachment of
the	devices.
The	FDD-1, HDD-1, or PCMCIA-1 icons	representfirst the

drive in the system configuration for each type of device. Similarly, the HDD-3, FDD-2, or PCMCIA-2 icons represent

thesecond drive, usually attached through a port replicator or an expansion unit.

The HDD-2 icon represents the hard disk drive in the UltraBay of the computer. The HDD-3 or HDD-4 icons represent the hard disk drive in the SelectaDock Docking

8 IBM Mobile Systems HMM