Red Bag

STEP 9

•Place the rear hole of the left decorative cover (9a) over the threaded post on the left side of structure 5e. Loosely attach a spring (SW10.2x18.4x2.5T) washer and a bolt (M10x1.5Px25L). Thread two bolts (M10x1.5Px25L) and two spring (SW10.2x18.4x2.5T) washers into the two front holes. Tighten all bolts with a 6mm L-shaped wrench. Repeat on the right side.

•Attach the front decorative cover (9c) over the front surfaces of the side decorative covers with four bolts and four spring (SW10.2x18.4x2.5T) washers. Tighten with a 6mm L-shaped wrench.