Star Trac 6800, 7000, 5700, 6900 Nxt, Pro/Elite, Install the Front Leg, NXT Only, Pro & Elite Only

Page 10

ASSEMBLY

Following these steps in order will minimize the build time and ensure proper assembly.

Note: Not all of the following procedures are performed on all models; Spinner ® Pro, Elite and NXT. If the procedure is specific to a model it will be

noted as follows: NXT Only, Pro/Elite Only, NXT/Elite Only, or Pro Only.

1. Install the Back Leg

NXT Only

Lift up the rear of the bike frame and place the rear leg assembly in position under the frame, aligning the holes in the leg with the holes in the frame.

Position the leg so the thicker end faces toward the front of the bike

Using the 5mm hex wrench and a 13mm

 

combination wrench insert 2- M10X55mm

 

(rear-most holes) and 2-M10X65mm

Step 1 (NXT)

(front-most holes) button head screws, nuts

and washers (under bolt head and nut), to

 

secure the rear leg assembly to the frame.

 

Tighten all hardware securely using a torque wrench to 85 Inch Pounds

 

Pro & Elite Only

 

Lift up the rear of the bike frame and place

 

the rear leg assembly in position under the

 

frame, aligning the holes in the leg with the

 

holes in the frame.

 

Using the 5mm hex wrench and a 13mm

 

combination wrench insert 2- M10X55mm

 

flat head screws, nuts and washers to secure

 

the rear leg assembly to the frame

 

Tighten all screws/nuts securely using a torque wrench to 85 Inch Pounds

Step 1 (Pro/Elite)

2. Install the Front Leg

NOTE: The front foot assembly has wheels attached to the front edge. Be sure the wheels face forward when installing the front leg assembly.

Stand the bike frame upright and gently tip the front of the bike up and position the front foot under the frame, with the wheels facing forward. Attach the front foot assembly to the frame, aligning the holes in the foot with the holes in the frame.

NXT Only

Position the leg so the thicker end and wheels face toward the front of the bike

Using the 5mm hex wrench and a 13mm combination wrench insert 2- M10X55mm (rear-most holes) and

2-M10X65mm (front-most holes) button head screws, nuts and washers (under bolt head and nut), to secure the front leg assembly to the frame.

Tighten all hardware securely using a torque wrench to 85 Inch Pounds

Step 2 (NXT)

Page 10

STAR TRAC GROUP CYCLES OWNER’S GUIDE

Page 9 Page 11
Image 10
Page 9 Page 11
Contents BikeSpinner Spinner Pro Spinner Elite Spinner NXT Star Trac Group Cycles OWNER’S Guide Introduction Operating Precautions Fitness SafeguardsSafety Instructions Assembly and Setup Bikespinner Assembly and SetupBike Parts List Description Qty Assembly StepInstall the Handlebar Install the Water Bottle HoldersNXT Parts List not shown Description Qty Spinner PRO / Elite / NXT Assembly and SetupPro/Elite Parts List Pro shown above Description Qty Star Trac Group Cycles OWNER’S Guide Pro/Elite Install the Front LegNXT NXT OnlyInstall the Saddle and Seat Slider Pro/Elite NXTInstall the Bottle Holders Pro Only NXT Pro/Elite StepTesting the Bike Use this checklist to perform the bike test procedureBike Spinner Seat AdjustmentsInstructions for USE Spinner NXTResistance Control Handlebar AdjustmentsPedal Strap Adjustment Smart Release SystemWork OUT Before BeginningWARM-UP COOL-DOWNMaintenance Preventive MaintenanceTool Purpose Inspection To move the cycle to a new location Parts ReplacementMoving and Leveling To level the cycleChain tension adjustment Chain Replacement Page Star Trac

6900, 5700, 6800, 7000 specifications

Star Trac is renowned in the fitness industry for producing high-quality commercial cardio equipment, and their various treadmill models, such as the 7000, 6800, 5700, and 6900 series, showcase the brand's commitment to innovation and performance.

The Star Trac 7000 treadmill is designed for high-performance facilities, featuring a powerful 4.0 HP motor that supports a maximum speed of 15 miles per hour. It utilizes Star Trac's advanced deck cushioning system, which reduces impact on joints, and has an inclined range of 0 to 15%, allowing users to diversify their workouts. The large, interactive touchscreen console provides customizable workout programs, heart rate monitoring, and entertainment options, enhancing user engagement and motivation.

Meanwhile, the Star Trac 6800 treadmill stands out with its user-friendly design and robust construction. Equipped with a 3.0 HP motor, this model supports a speed range of up to 12 miles per hour and includes adjustable incline settings. Its intuitive console provides access to a variety of workout programs, and the integrated heart rate sensors ensure users can monitor their cardiovascular performance. The 6800's spacious running surface, combined with a cushioned deck, makes it ideal for users of various fitness levels.

The Star Trac 5700 treadmill caters to those seeking a balance between performance and value. Featuring a 2.5 HP motor, the 5700 offers a top speed of 12 miles per hour and a 15% incline, making it suitable for both casual users and serious athletes. The console offers essential metrics such as time, distance, speed, and calories burned, while heart rate monitoring is available through contact sensors. Its compact footprint makes it an excellent choice for facilities with limited space.

Finally, the Star Trac 6900 treadmill combines advanced technology with an ergonomic design. With a powerful 3.5 HP motor, this model reaches up to 12 miles per hour and features an incline range of 0 to 15%. The 6900 boasts a large console with integrated Bluetooth technology, allowing users to connect to their personal devices, access fitness apps, and share performance data. The enhanced cushioning system further reduces impact, promoting longer workout sessions with minimized discomfort.

In summary, the Star Trac 7000, 6800, 5700, and 6900 treadmills offer unique features tailored to meet the diverse needs of fitness enthusiasts. These models incorporate cutting-edge technology, effective cushioning, and user-friendly consoles that enhance the workout experience, solidifying Star Trac's reputation in the commercial fitness market.
Top Page Image Contents