Handlebar Adjustments, Pedal Strap Adjustment

HANDLEBAR ADJUSTMENTS

Proper position for the handlebar is based primarily on comfort. Typically, the handlebar should be positioned slightly higher than the seat. All group cycles allow for adjustment of handlebar height. Additionally, the V-bike®Spinner® allows for fore and- aft adjustment of the handlebar.

To adjust the handlebar height:

(V-bike®Spinner®) Loosen the handlebar height tension handle by turning the handle counterclockwise. Raise or lower the handlebar to the desired height, then tighten the tension handle by turning clockwise. Be sure to tighten firmly.

(Spinner® Pro/Elite/NXT) Turn the handlebar height pop-pin counterclockwise and pull out on the pin to release it from its current preset location.

Raise or lower the handlebar to the desired height, then gently release the pop-pin. Raise or lower the handlebar slightly, if necessary, until the pop-pin engages a preset hole. Turn the pop-pin clockwise to secure.

To adjust the handlebar horizontal position:

NOTE: Handlebar horizontal adjustment is available on the V-bike®Spinner® only. Loosen the handlebar fore-and-aft tension handle by turning the handle counterclockwise. Move the handlebar forward or back to the desired position, then tighten

the tension handle by turning clockwise. Be sure to tighten the handle firmly.

PEDAL STRAP ADJUSTMENT

The pedal straps should be adjusted to hold the foot snugly in the pedal.

To adjust the pedal straps:

Place each foot in the toe clip until the ball of the foot is over the pedal axle.

The front of the shoe may not completely fill the toe cage. Rotate the pedals until one foot is within arms reach, then tighten the webbed cloth buckle until the cage of the toe clip is snug around the foot. Repeat for the other foot. Point your toes and knees directly forward to ensure maximum pedal efficiency.

RESISTANCE CONTROL

Pedaling resistance is controlled by the Push Brake System knob located below the handlebar. Resistance adjustments can be made while riding to vary the intensity of your workout.

To adjust pedaling resistance:

To increase resistance, turn the Push Brake System knob clockwise (+); to decrease resistance, turn the knob counterclockwise (-).

In case of emergency, you may press directly down on the Push Brake System knob to bring the flywheel to an abrupt stop.

SMART RELEASE™ SYSTEM

(Spinner® Elite) Allows the benefits of the direct drive system with a safety clutch to release the crank from the direct

drive when a force is applied to the pedals.

Page 15

STAR TRAC GROUP CYCLES OWNER’S GUIDE

6900, 5700, 6800, 7000 specifications

Star Trac is renowned in the fitness industry for producing high-quality commercial cardio equipment, and their various treadmill models, such as the 7000, 6800, 5700, and 6900 series, showcase the brand's commitment to innovation and performance.

The Star Trac 7000 treadmill is designed for high-performance facilities, featuring a powerful 4.0 HP motor that supports a maximum speed of 15 miles per hour. It utilizes Star Trac's advanced deck cushioning system, which reduces impact on joints, and has an inclined range of 0 to 15%, allowing users to diversify their workouts. The large, interactive touchscreen console provides customizable workout programs, heart rate monitoring, and entertainment options, enhancing user engagement and motivation.

Meanwhile, the Star Trac 6800 treadmill stands out with its user-friendly design and robust construction. Equipped with a 3.0 HP motor, this model supports a speed range of up to 12 miles per hour and includes adjustable incline settings. Its intuitive console provides access to a variety of workout programs, and the integrated heart rate sensors ensure users can monitor their cardiovascular performance. The 6800's spacious running surface, combined with a cushioned deck, makes it ideal for users of various fitness levels.

The Star Trac 5700 treadmill caters to those seeking a balance between performance and value. Featuring a 2.5 HP motor, the 5700 offers a top speed of 12 miles per hour and a 15% incline, making it suitable for both casual users and serious athletes. The console offers essential metrics such as time, distance, speed, and calories burned, while heart rate monitoring is available through contact sensors. Its compact footprint makes it an excellent choice for facilities with limited space.

Finally, the Star Trac 6900 treadmill combines advanced technology with an ergonomic design. With a powerful 3.5 HP motor, this model reaches up to 12 miles per hour and features an incline range of 0 to 15%. The 6900 boasts a large console with integrated Bluetooth technology, allowing users to connect to their personal devices, access fitness apps, and share performance data. The enhanced cushioning system further reduces impact, promoting longer workout sessions with minimized discomfort.

In summary, the Star Trac 7000, 6800, 5700, and 6900 treadmills offer unique features tailored to meet the diverse needs of fitness enthusiasts. These models incorporate cutting-edge technology, effective cushioning, and user-friendly consoles that enhance the workout experience, solidifying Star Trac's reputation in the commercial fitness market.