Star Trac 6900, 7000, 5700, 6800 manual Install the Saddle and Seat Slider, Pro/Elite NXT

Page 11

Pro & Elite Only

Using the 5mm hex wrench and a 13mm combination wrench insert 2- M10X55mm flat head screws, nuts and washers to secure the front leg assembly to the frame.

Tighten all screws/nuts securely using a torque wrench to 85 Inch Pounds

Step 2 (Pro/Elite)

Move the bike to a flat surface and adjust the four leveling feet so the bike is stable.

3. Install the Saddle and Seat Slider

Install the seat post into the frame and lower it to the lowest position and tighten the pop pin securely. Slide the seat slide into the top of the seat post with the saddle pointed towards the front of the bike.

NXT Only

Rotate the seat slider lock knob as needed so that the slider clamp is in alignment with the guide rail.

There is a locking pin under the saddle that has to be pulled

 

 

up as you move the slider into position. Release the pin

Step 3a (Pro/Elite)

Step 3a (NXT)

when the indicator is within the 0 to 9 range.

Test the seat slide for proper operation and full travel.

Pro & Elite Only

Unscrew the seat slider pin far enough to allow the slider to pass over the pin.

Tighten screw with the slider in the 0 to 10 range.

Test the seat slide for proper operation and full travel.

Step 3b (Pro/Elite)

Step 3b (NXT)

4. Install the Pedals

NOTE: The pedal shafts are marked “R” and “L”. Trying to install the pedals on the wrong side may damage the pedal and the crank arm take caution to attach the pedals to the correct side of the bike.

Install the pedals on the pedal cranks using a 15mm open-end wrench and tighten securely.

Turn the left pedal spindle counterclockwise when threading into the left crank arm; turn the right pedal spindle clockwise when threading into the right crank arm.

Step 4

Page 11

STAR TRAC GROUP CYCLES OWNER’S GUIDE

Page 10 Page 12
Image 11
Page 10 Page 12
Contents BikeSpinner Spinner Pro Spinner Elite Spinner NXT Star Trac Group Cycles OWNER’S Guide Introduction Safety Instructions Fitness SafeguardsOperating Precautions Bike Parts List Description Qty Bikespinner Assembly and SetupAssembly and Setup Step AssemblyInstall the Water Bottle Holders Install the HandlebarPro/Elite Parts List Pro shown above Description Qty Spinner PRO / Elite / NXT Assembly and SetupNXT Parts List not shown Description Qty Star Trac Group Cycles OWNER’S Guide NXT Only Install the Front LegNXT Pro/ElitePro/Elite NXT Install the Saddle and Seat SliderNXT Pro/Elite Step Install the Bottle Holders Pro OnlyUse this checklist to perform the bike test procedure Testing the BikeSpinner NXT Seat AdjustmentsInstructions for USE Bike SpinnerSmart Release System Handlebar AdjustmentsPedal Strap Adjustment Resistance ControlCOOL-DOWN Before BeginningWARM-UP Work OUTTool Purpose Preventive MaintenanceMaintenance Inspection To level the cycle Parts ReplacementMoving and Leveling To move the cycle to a new locationChain tension adjustment Chain Replacement Page Star Trac

6900, 5700, 6800, 7000 specifications

Star Trac is renowned in the fitness industry for producing high-quality commercial cardio equipment, and their various treadmill models, such as the 7000, 6800, 5700, and 6900 series, showcase the brand's commitment to innovation and performance.

The Star Trac 7000 treadmill is designed for high-performance facilities, featuring a powerful 4.0 HP motor that supports a maximum speed of 15 miles per hour. It utilizes Star Trac's advanced deck cushioning system, which reduces impact on joints, and has an inclined range of 0 to 15%, allowing users to diversify their workouts. The large, interactive touchscreen console provides customizable workout programs, heart rate monitoring, and entertainment options, enhancing user engagement and motivation.

Meanwhile, the Star Trac 6800 treadmill stands out with its user-friendly design and robust construction. Equipped with a 3.0 HP motor, this model supports a speed range of up to 12 miles per hour and includes adjustable incline settings. Its intuitive console provides access to a variety of workout programs, and the integrated heart rate sensors ensure users can monitor their cardiovascular performance. The 6800's spacious running surface, combined with a cushioned deck, makes it ideal for users of various fitness levels.

The Star Trac 5700 treadmill caters to those seeking a balance between performance and value. Featuring a 2.5 HP motor, the 5700 offers a top speed of 12 miles per hour and a 15% incline, making it suitable for both casual users and serious athletes. The console offers essential metrics such as time, distance, speed, and calories burned, while heart rate monitoring is available through contact sensors. Its compact footprint makes it an excellent choice for facilities with limited space.

Finally, the Star Trac 6900 treadmill combines advanced technology with an ergonomic design. With a powerful 3.5 HP motor, this model reaches up to 12 miles per hour and features an incline range of 0 to 15%. The 6900 boasts a large console with integrated Bluetooth technology, allowing users to connect to their personal devices, access fitness apps, and share performance data. The enhanced cushioning system further reduces impact, promoting longer workout sessions with minimized discomfort.

In summary, the Star Trac 7000, 6800, 5700, and 6900 treadmills offer unique features tailored to meet the diverse needs of fitness enthusiasts. These models incorporate cutting-edge technology, effective cushioning, and user-friendly consoles that enhance the workout experience, solidifying Star Trac's reputation in the commercial fitness market.
Top Page Image Contents