JVC LYT0596-001A 48 EN, Provided with GR-DVL707, Installing The Batteries RM-V716U

48 EN		USING THE REMOTE CONTROL UNIT
			The Full-Function Remote Control Unit can operate
1			this camcorder from a distance as well as the basic
			operations (Playback, Stop, Pause, Fast-Forward and
3			Rewind) of your VCR. It also makes additional
Tab			playback functions possible.
			Installing The Batteries (RM-V716U,
			provided with GR-DVL707)
			The remote control uses two “AAA (R03)” size
			batteries. See “General Battery Precautions”
2	+		( pg. 73).
			Remove the battery compartment cover while
–		–	1 pushing up the tab as illustrated.
		+	Insert two “AAA (R03)” size batteries in the
			2 correct direction.
			3 Re-attach the battery compartment cover.

2

1 3

1

Knob

Installing The Battery (RM-V711U, provided with GR-DVL800)

The remote control uses one lithium battery (CR2025).

1 Pull out the battery holder while pressing the knob as shown.

2 Insert the battery in the holder, and be sure to have the “+” mark visible.

3 Slide the holder back in until you hear a click.

•Read the caution concerning lithium batteries (
pg. 2).

Remote sensor

Transmitted beam effective area

5m

30°

When using the remote control, be sure to point it at the remote sensor. The illustration shows the approximate transmitted beam effective area for indoor use.

The transmitted beam may not be effective or may cause incorrect operation outdoors or when the remote sensor is directly exposed to sunlight or powerful lighting.

30°