Connector cover**
To S
To AV
To JLIP/ 
EDIT
Core filter
EN53
MAKE CONNECTIONS
Also refer to pg. 40 and 41.
1
A JVC VCR equipped with a remote pause connector . . .
... connect the editing cable to the Remote PAUSE connector.
A JVC VCR not equipped with a remote pause connector but equipped with an R.A. EDIT connector . . .
... connect the editing cable to the R.A.EDIT connector.
A VCR other than above . . .
... connect the editing cable to the remote control’s PAUSE IN connector.
Core filter 
To AUDIO, VIDEO* and
Audio/Video cable
Editing cable (provided)
2 Insert a recorded tape into the camcorder. Set the VIDEO/DSC Switch to “VIDEO”, then set the Power
Switch to “ 
” while pressing down the Lock Button located on the switch.
3 Turn the VCR power on, insert a recordable tape and engage the AUX mode (refer to the VCR’s instructions).
NOTES:
● Before Random Assemble Editing, make sure the |
indications do not appear on the TV monitor. If they do, |
| To |
| Remote PAUSE |
VCR | or R.A.EDIT |
| |
| To PAUSE IN |
DISPLAY | |
| T W |
TV |
|
(provided with | (provided with |
*Connect when the
**When connecting cables, open this cover.
ATTENTION FOR EDITING CABLE
Make sure you connect the end with the core filter (plug which has 3 rings around the pin) to the camcorder.
they will be recorded onto the new tape. |
To choose whether or not the following displays appear on the connected TV . . .
•Date/Time
.... set “DATE/TIME” to “ON” or “OFF” in the Menu
Screen ( pg. 32).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Menu
Screen ( pg. 32).
•Playback Sound Mode, Tape Speed And Tape Running Displays
.... set “ON SCREEN” to “LCD” or “SIMPLE” in the Menu Screen ( pg. 32). Or, press DISPLAY on the remote control.
●When connecting the cables, make sure to connect the end with a core filter to the camcorder. The core filter reduces interference.
●When editing on a VCR equipped with a DV input connector, an optional DV cable can be connected instead of an
CONTINUED ON NEXT PAGE
