Dell 200 owner manual Back Panel Connectors

Back Panel Connectors

1 2 3 4

5

6

7

11 10 9 8

1network activity Flashes a yellow light when the computer is transmitting

light	or receiving network data. A high volume of network traffic
	may make this light appear to be in a steady "on" state.

2network adapter To attach your computer to a network or broadband

connector	device, connect one end of a network cable to either a
	network port or your network or broadband device.
	Connect the other end of the network cable to the network
	adapter connector on the back panel of your computer. A
	click indicates that the network cable has been securely
	attached.
	NOTE: Do not plug a telephone cable into the network
	connector.
	On computers with a network connector card, use the
	connector on the card.
	It is recommended that you use Category 5 wiring and
	connectors for your network. If you must use Category 3
	wiring, force the network speed to 10 Mbps to ensure
	reliable operation.

3link integrity light • Green — A good connection exists between a 10/100 Mbps network and the computer.

•Off — The computer is not detecting a physical connection to the network.

20

Setting Up and Using Your Computer