12If you removed an add-in network connector:

a Enter system setup (see "System Setup" on page 174), go to Onboard Devices and select Integrated NIC, and then change the setting

to On.

b Connect the network cable to the integrated connector on the back panel of the computer. See "Back Panel Connectors" on page 20.

Bezel

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

Removing the Bezel

1Follow the procedures in "Before You Begin" on page 101.

2Remove the computer cover (see "Removing the Computer Cover" on page 103).

Removing and Installing Parts

123

Page 123
Image 123
Dell 200 owner manual Removing the Bezel, If you removed an add-in network connector, To On, 123