Dell 200 owner manual 147

12Enter system setup (see "System Setup" on page 174) and select the appropriate Drive option.

13Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on page 86).

Installing a Second Optical Drive

1Follow the procedures in "Before You Begin" on page 101.

2Remove the computer cover (see "Removing the Computer Cover" on page 103).

3Remove the bezel (see "Removing the Bezel" on page 123).

4Align the tip of a Phillips screwdriver with the slot on the break-away metal plate and rotate the screwdriver outwards to break the metal plate.

5Gently slide the drive into place.

6Align the screw holes in the optical drive with the screw holes in the optical drive bay.

7Replace and tighten the two screws securing the optical drive.

8Connect the power and data cables to the drive.

9Connect the data cable to the system board connector on the system board.

Removing and Installing Parts

147