Dell 200 owner manual Memory, 111, DC Power Connector P7 Pin Number Signal Name, +12 Vadc Yellow

DC Power Connector P7

Pin Number	Signal Name	22-AWG Wire
1	+5 VDC	Red
2	GND	Black
3	GND	Black
4	+12 VADC	Yellow

Memory

You can increase your computer memory by installing memory modules on the system board. Your computer supports DDR2 memory. For additional information on the type of memory supported by your computer, see "Memory" on page 169.

NOTICE: Do not install ECC or buffered memory modules. Only unbuffered, non- ECC memory is supported.

Removing and Installing Parts

111