Dell 200 Optical drive Data cable, System board Screw holes Screws Connector Optical drive bay

6

1

5

2

	3
					4
1	optical drive	2	data cable	3	power cable
4	system board	5	screw holes in the	6	screws (2)
	connector		optical drive bay (2)

9Replace the bezel (see "Replacing the Bezel" on page 125).

10Replace the computer cover (see "Replacing the Computer Cover" on page 166).

NOTICE: To connect a network cable, first plug the cable into the network device and then plug it into the computer.

11Connect your computer and devices to their electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software required for drive operation.

146

Removing and Installing Parts