Undoing the Last System Restore

NOTICE: Before you undo the last system restore, save and close all open files and exit any open programs. Do not alter, open, or delete any files or programs until the system restoration is complete.

Windows XP

1Click StartAll ProgramsAccessoriesSystem ToolsSystem Restore.

2Click Undo my last restoration and click Next.

Windows Vista

1Click Start .

2In the Start Search box, type System Restore and press <Enter>.

3Click Undo my last restoration and click Next.

Enabling System Restore

NOTE: Windows Vista does not disable System Restore; regardless of low disk space. Therefore, the steps below apply only to Windows XP.

If you reinstall Windows XP with less than 200 MB of free hard-disk space available, System Restore is automatically disabled.

To see if System Restore is enabled:

1Click StartControl PanelPerformance and MaintenanceSystem.

2Click the System Restore tab and ensure that Turn off System Restore is unchecked.

Using Dell PC Restore and Dell Factory Image Restore

NOTICE: Using Dell PC Restore or Dell Factory Image Restore permanently deletes all data on the hard drive and removes any programs or drivers installed after you received your computer. If possible, back up the data before using these options. Use PC Restore or Dell Factory Image Restore only if System Restore did not resolve your operating system problem.

NOTE: Dell PC Restore by Symantec and Dell Factory Image Restore may not be available in certain countries or on certain computers.

Use Dell PC Restore (Windows XP) or Dell Factory Image Restore (Windows Vista) only as the last method to restore your operating system. These options restore your hard drive to the operating state it was in when you purchased

Troubleshooting Tools

95

Page 95
Image 95
Dell 200 owner manual Using Dell PC Restore and Dell Factory Image Restore